Home › Blog › Posting and scheduling

Photo: Plann / Pexels
You searched "how to turn blog post into video" because you have solid articles gathering dust and no bandwidth to set up lights or memorize lines. You need a vertical clip ready for Reels, Shorts, or TikTok by this afternoon, not a weekend editing marathon.
This guide walks through the full pipeline: condensing a 1,200-word post into a sixty-second script, recording clean audio with the phone in your pocket, stitching royalty-free b-roll on your laptop, burning in captions that stay readable on mute, and exporting the exact dimensions each platform expects.
A local bike-shop owner turning a "commuter tire pressure" guide into a forty-five-second Shorts teaser is the concrete case we keep in mind.
You finish with a repeatable checklist you can hand to an assistant or run yourself next Tuesday.
Key takeaways
Start by timing yourself reading the post aloud at a normal pace. Most people speak around 130 words per minute, so a 90-second video needs roughly 190 words. If your article runs 1,200 words, you'll have to cut hard. Keep the hook, the main point, and one concrete example; delete the history, the caveats, and the "in this post I'll cover" fluff. A bakery owner turning a sourdough starter guide into a Reel might open with "Day three: bubbles mean it's alive," then show the float test, then end with "Feed it daily or freeze the discard for pancakes." That three-beat structure fits comfortably under a minute.
Write the script in two columns: left side for visuals, right side for narration. This forces you to match every sentence to something you can actually show. If a line says "consistency matters" but you only have a static photo of a jar, rewrite the line or find a clip of someone stirring. Read each sentence aloud while watching the timer; if you stumble, shorten it. Replace "utilize" with "use," swap passive phrases for active verbs, and kill any clause that starts with "it is important to."
If the draft still runs long, record a quick voice memo on your phone and trim the audio file first; cutting sound is faster than rewriting text.
Grab your phone and find a quiet corner, a walk-in closet full of coats works surprisingly well to deaden echo. Open the built-in voice memo app, set the format to lossless or high quality, and do a quick test: say "testing one two three" at the volume you'll actually use, then play it back. If you hear room hiss or a low hum from the fridge, move closer to the mic or throw a heavy blanket over your head and the phone like a makeshift tent.
Aim for a steady pace around 150 words per minute so a 130-word script fits comfortably under sixty seconds. Read in short chunks, two or three sentences, then pause; this gives you clean cut points later and keeps you from running out of breath. Keep a glass of room-temperature water handy and sip between takes. If you stumble on a phrase, just back up to the start of that sentence and go again; you'll stitch the good takes together in the editor.
Example: a freelance UX writer turning a case study about a fintech onboarding flow into a Reel records the intro, three tip segments, and a closing question as five separate memos, then renames them hook, tip-one, tip-two, tip-three, cta before AirDropping to the laptop.
Open your editing software and drag the voiceover onto the timeline first; that audio track becomes the backbone you build everything around. Listen through once and drop a marker at every natural pause or topic shift, those markers tell you where one visual idea ends and the next begins. Now pull in your stock clips or screen recordings and trim each one to sit between two markers. If a clip runs long, speed it up slightly or cut the middle; if it’s too short, hold the last frame for a beat so the viewer isn't jarred. A simple rhythm works: three to four seconds per shot, matching the pace of spoken sentences.
Watch for two common problems. First, jump cuts that make the speaker appear to teleport, fix this by inserting a B-roll clip or a quick zoom-in on the same footage. Second, audio pops at edit points, add a short crossfade of two or three frames on every audio cut. Many creators find it helpful to rename each clip in the project panel with a one-word tag like "intro," "demo," or "close" so the timeline stays readable when you have twenty pieces.
Example: a freelance UX designer turning a case-study post into a sixty-second reel. She drops her narration, marks the beats at "research," "wireframes," "testing," and "results," then slots in screen recordings of each phase. The research section runs long, so she speeds the scroll to 1.3x and overlays a quick text label. The testing clip is only two seconds, so she freezes the final frame while the voiceover finishes the sentence. A two-frame audio crossfade removes the click where the music bed meets the narration. Export a quick draft, watch on phone speakers, and adjust any clip that feels rushed or dragging before you move to captions.
Related: How to Post to All Social Media Platforms at Once
Captions keep people watching when the sound is off, so treat them as part of the edit rather than an afterthought. Open the captions option in your editor and choose a clean sans-serif font, something like Inter or Roboto at about 48 points works well on a phone screen. Set the text color to white with a subtle black outline or a semi-transparent box behind each line so it stays readable over both light and dark footage. Limit each caption to two lines of roughly 32 characters; if a sentence runs longer, split it at a natural pause instead of letting it wrap awkwardly.
Time the captions so they appear exactly when the words are spoken, then linger for about half a second after the voice stops, this gives the eye a moment to catch up. Most editors let you nudge the start and end points by dragging the caption block on the timeline; use that instead of typing timestamps by hand. Watch the whole video once at 1.5× speed to spot any drift, then do a final pass at normal speed with the volume muted. If a line still feels rushed, shorten the wording rather than shrinking the font.
Each platform wants a slightly different shape, so you'll end up exporting three or four versions of the same edit. Start with the 9:16 vertical master, that covers TikTok, Reels, and Shorts, then duplicate the timeline and crop a 1:1 square for the Instagram feed and a 4:5 portrait for LinkedIn. A bakery owner showing a morning dough stretch might keep the wide mixer shot centered for the square cut, then pan slightly left for the vertical so the rising loaf stays in frame. Set the bitrate around 8 to 10 Mbps for 1080p; going higher just bloats the file without visible gain on mobile screens.
Name files so you can tell them apart at a glance: `bakery-dough-vertical.mp4`, `bakery-dough-square.mp4`, and so on. Before you upload, open each file on your phone and watch with sound off, captions should read cleanly, no text clipped by the interface chrome. If a lower-third sits too low on the Shorts version, nudge it up ten pixels in the project and re-export just that file. Many scheduling tools let you attach the right asset to each platform in one calendar view, so you only schedule once.
If you would rather skip the manual steps, Tonefy can turn the article into a finished short video on your phone. Open the app and tap the URL to Video screen. Paste the link to your blog post and the app writes a script, picks stock footage, adds a voiceover and burns in captions. You can choose from more than 300 AI voices across many languages so you don't have to record anything yourself. When the first draft appears, open the editor to trim or reorder clips, swap music, add text or apply a filter. There are 138 caption styles including bold, highlight, neon and sticker; tap one to apply it and edit the wording if the auto-captions missed a term.
Export the video at 720p with a watermark on the free plan, which gives you 10 minutes of video each month. If you need 1080p without a watermark, or want to post and schedule directly from the app, you'll need a Pro or Creator monthly plan. On those plans the Edit & Post screen lets you tick TikTok, YouTube Shorts, Instagram Reels, Facebook Pages, Pinterest and LinkedIn. Each platform asks for its own required choices such as TikTok privacy, YouTube audience or a Pinterest board. Tap Post Now to publish immediately or Schedule to pick a date and time. If a connection expires, the Connect Accounts screen shows a Reconnect button for that platform.
Paste the blog post link into Tonefy's URL to Video screen; the app writes a script, selects stock footage, adds an AI voiceover from over 300 voices, and burns in captions. Open the phone editor to trim or reorder clips, change music, add text, or apply filters. Then choose platforms like TikTok, Reels, or LinkedIn and tap Post Now or Schedule.
You now have a repeatable path: trim the post to a tight script, record clean audio on your phone, match stock clips to each line, burn in captions that stay readable, and export the right vertical size for each feed. A freelance copyeditor testing this workflow took a post about fixing passive voice, cut it to five sentences, recorded voiceover in a closet lined with blankets, paired each sentence with a screen recording of a tracked-changes document or a blinking cursor, and exported a 9:16 file for Reels and a 16:9 backup for Shorts.
When you hit snags, use this decision tree instead of guessing. If the audio sounds thin or hissy, record a fresh take inside a parked car with the windows up; the upholstery kills room echo better than a blanket fort. If the footage runs long before the voiceover finishes, do not stretch the clip, split the sentence in two and insert a tight b-roll shot, like a close-up of a keyboard shortcut or a coffee mug sliding into frame. If captions drift off the beat, open the caption track, zoom the timeline to frame level, and nudge each block by one or two frames until the word "cut" lands exactly on the scissor icon. If the file rejects on upload, re-export at 30 fps with a constant bitrate of 12 Mbps; variable bitrate confuses the transcoder.
Your first week could look like this: - Monday: pick one evergreen post and rewrite it into a 130-word script - Tuesday: record the voiceover in two takes inside your car, keep the best - Wednesday: drop the audio into your editor and lay in five to seven clips - Thursday: add captions, check contrast on a phone screen in sunlight, fix any drift - Friday: export both aspect ratios at 30 fps constant bitrate, upload to one platform, note the time it took - Saturday: review the upload, write down two specific settings to lock in next time - Sunday: rest, then choose the next post
Treat the first few videos as practice reps, not portfolio pieces.
Turn an article into a video
Paste a link and Tonefy AI writes, voices and edits a short video from it.
Official help pages, where the current rules and limits are published. They change often, so check them before you post.